2020-06-23

Wear reason of T-clamp

Through the comparison of the above data and the analysis of the environment, equipment and other factors, it is concluded that the wear causes of the conductor at the T-clamp are as follows: (1) The wear rate of the upper conductor at the T junction is higher than that of the lower conductor, because the sag of the upper conductor changes greatly all the year round, the grip direction of the clamp and the conductor also changes, and the stress situation changes accordingly.

2020-06-23

Analysis and comparison of wear of T-clamp

Of the six clamps, 9 were worn out most seriously, with a wear rate of 47.3%; 2 were worn out least, with a wear rate of 10.5%. The most serious wear rate of t-wire is 44.5%. It can be seen that the T-clamp has different degrees of wear on the main wire and t-wiring wire. 　　The abrasion of conductor at T-junction clamp is distributed on 6 clamps of different T-junction. By comparing the abrasion data of upper and

2020-06-23

What are the types of line fittings?

The line fittings are divided into the following six categories according to their uses: (1) Suspension clamp: fixed type - U-bolt type and stud type. Release type - U-bolt type and strut bolt type. (2) Tension clamp: 1) bolt type - with front mounting and reverse mounting. 2) Crimp type - detachable and non detachable.